Technologies - Highly Conductive Silver Inks
Typical Cure Cycle
30 to 60 minutes at 130°C in a box oven or IR equivalent. Resistance can be lowered at higher cure
temperatures.
Typical Cured Print Thickness
8 to 10 microns
Shelf life in unopened jars is six months when stored at room temperature. The ink is also RoHS compliant since it requires no solder for termination and uses no materials currently on the RoHS banned list.
Typical Properties
Viscosity 20K to 40K cps, HBT #3 spindle, 10 rpm
Percent Solids 76 to 82
Coverage 100 to 200 sq cm/gm depending on screen
Sheet Resistivity Less than 3 milliohms per square per mil on higher temp substrates; Less than 5 milliohms per square per mil on lower temp substrates
Adhesion Passes cross hatch tape test (3M Scotch Tape #810)
Clean Up Isopropyl Alcohol or Acetone